Need help?Do you have a question about the Fronius IG 4000 and is the answer not in the manual?
General| Number of MPP Trackers | 1 |
|---|---|
| Nominal AC Output Voltage | 230 V |
| AC Output Frequency | 50/60 Hz |
| Rated Output Power | 4000 W |
| Max. apparent AC power | 4000 VA |
| Maximum AC Output Power | 4000 W |
| Cooling | Convection |
Instructions contain important safety information for installation and maintenance.
Explains warning symbols and their meanings for equipment or personnel.
All electrical installations must follow relevant national and local codes.
Details safety measures for users and equipment during operation.
Describes how the inverter monitors grid voltage and frequency.
Details the GFDI circuit for detecting and interrupting ground faults.
Explains the transformation of DC to AC current for home or grid use.
Describes automatic monitoring of grid voltage and frequency.
Details the display as the interface for operation and data availability.
Covers installation and connection procedures for the Fronius IG unit.
Provides guidance on selecting an appropriate installation location.
Instructions for mounting the inverter using the mounting plate.
Describes how to connect the inverter to the public AC grid.
Details the AC-side terminals and grounding connections.
Guide to connecting solar module strings to the inverter.
Step-by-step guide to commission the inverter after installation.
Lists available options and system upgrades for the inverter.
Safety precautions when inserting option cards.
Explains Solar Net as a data network for inverters and components.
Details the controls and indicators on the inverter's front panel.
Describes the self-test and grid test procedure upon startup.
Steps to access the inverter's menu level.
Explains the different display modes available.
Allows easy readjustment of the inverter's preset parameters.
Overview of the self-diagnostic system and status codes.
Troubleshooting steps for a completely dark display after sunrise.
Explains ground fault detection and the required actions.
Temporary status codes usually caused by grid issues.
Temporary status codes typically related to grid voltage or detection.
Status codes during feed-in that don't cause permanent interruption.
Status codes that may require intervention from a Fronius technician.
Status codes that generally do not impair grid feeding operation.
Contact information and advice for error reporting.
Detailed technical specifications for the Fronius IG inverters.
Technical data specific to the Fronius IG 2000 model.
Technical data specific to the Fronius IG 3000 model.
Technical data specific to the Fronius IG 2500-LV model.
Technical data specific to the Fronius IG 4000 model.
Technical data specific to the Fronius IG 5100 model.
Technical data specific to the Fronius IG 4500-LV model.
Table of field adjustable trip points for different voltage ranges.
Information on warranty terms and product registration.
Information on proper disposal and recycling of obsolete equipment.
Lists the product models covered by the certificate.
Notes regarding surge requirements and testing procedures.
Summary of CSA certification and testing for various models.
To Next Page