Fronius IG Plus A 3.0-1 UNI - Setting Time and Date

108
The second digit flashes.
Use the ‘Up’ and ‘Down’ keys to select
a value for the second digit (e.g., 0)
Press the ‘Enter’ key
The first digit after the decimal point flas-
hes.
Use the ‘Up’ and ‘Down’ keys to select
a value for the first digit after the deci-
mal point (e.g., 4)
Press the ‘Enter’ key
The second digit after the decimal point
flashes.
Use the ‘Up’ and ‘Down’ keys to select
a value for the second digit after the
decimal point (e.g., 8)
The values that can be set range from
00.01 to 99.99.
Press the ‘Enter’ key
The set rate for energy supplied flashes.
Press the ‘Enter’ key
The currency and the rate for supplied
energy are now accepted.
Press the ‘Esc’ key to exit the ‘CASH’
menu item
Displaying and
Setting Parame-
ters in the "DAT-
COM" Menu Item
Select menu item ‘DATCOM’
Press the ‘Enter’ key
The following displays depend on
whether
- a data connection is available
- a data connection is faulty or an
option is not installed
12
13
14
15
16
17
18
19
1
2