84
Confirm the status message by pres-
sing the "Enter" key
The current insulation value is displayed.
Press the "Menu" key
The "menu" is displayed.
Select the "Setup" mode using the
"Left" or "Right" keys
Press the unassigned "Esc" key 5 x
"CODE" is displayed, the first digit flashes.
Use the "Up" and "Down" keys to se-
lect the value for the first digit of the ac-
cess code
Press the "Enter" key
The second digit flashes.
Use the "Up" and "Down" keys to se-
lect a value for the second digit of the
access code
Press the "Enter" key
The third digit flashes.
Use the "Up" and "Down" keys to se-
lect a value for the third digit of the ac-
cess code
Press the "Enter" key
1
2
3
4
5
7
8
9
10
To Next Page
Loading...
