ZHEN
17
Dismantling and as-
sembling Robacta
Twin torch necks
NOTE! Risk of coolant
escaping through loose
union nuts. When fitting the Twin
torch neck, ensure that the union
nuts are securely fastened: Tighten
union nuts using flat spanner and
torque wrench, tightening torque =
18 ±2 Nm.
NOTE! When connecting
and terminating lines,
observe the following sequence:
1. Blow-out line x.1
2. Water flow x.2 (blue)
3. Water return x.3 (red)
To Next Page
Loading...
