ZHEN
23
Replacing the gas nozz-
le
obacta 160/300/500
Robacta 700/700 Time
NOTE! The O-rings may
be damaged if the gas
nozzle is removed or
replaced incorrectly. Always open
the union nut before removing or
replacing the gas nozzle.
Important! When replacing the
gas nozzle, ensure that the holes
on the perforated ring are positio-
ned exactly over the holes in the
torch body. Otherwise, sufficient
cooling of the gas nozzle cannot
be guaranteed.
* specified direction of rotation
To Next Page
Loading...
