To Next PageTo Next Page
Need help?Do you have a question about the Fronius Symo 20.0-3-M and is the answer not in the manual?
General| AC nominal output | 20.0 kW |
|---|---|
| Max. output current | 29.0 A |
| Max. input voltage | 1000 V |
| MPPT voltage range | 200 - 800 V |
| Number of MPPT | 2 |
| Dimensions (W x H x D) | 725 x 510 x 225 mm |
| Max. apparent AC power | 20000 VA |
| AC nominal voltage | 400 V |
| AC nominal frequency | 50 / 60 Hz |
| THD | < 3% |
| Max. input current | 33.0 A |
| Protection class | IP 66 |
| Operating temperature range | -25°C to +60°C |
| Warranty | 5 years |
| Max. DC power | 30.0 kW |
| Power factor | 1 |
General safety guidelines and warnings for device operation and handling.
Guidelines for proper use and identification of device warning notices.
Controls, connections, and initial setup of the Fronius Datamanager 2.0.
Step-by-step guide for initial setup and configuration of the Datamanager.
Description of the inverter's physical controls, display, and status LEDs.
How to navigate menus, activate backlighting, and open menu levels.
Information on initial setup and software update procedures.
Procedure for setting values, and configuring time and date.
Using USB for datalogging, software updates, and safe removal.
