Fronius VR 4000 - Connecting the Welding Torch; Welding Torch Connections; Safety; Connecting MIG;MAG Manual Welding Torch

30
Connecting the welding torch
Welding torch
connections
Safety
Connecting MIG/
MAG manual
welding torch
* The MIG/MAG manual welding torch con-
trol plug comes in two versions:
- as a "Tuchel" plug
- as a LocalNet plug, e.g. on JobMaster
welding torches
Connecting MIG/
MAG robot weld-
ing torch
Fronius F++ Euro connection for Dinse for Tweco
VR 4000 X X X X
VR 4000-30 X X - -
VR 4000-30 TIME X - - -
NOTE! When connecting the welding torch, check that
- all connections are connected properly
- all cables, leads and hosepacks are undamaged and correctly insulated.