Fronius WF 25i - Wire-Feeder Specifications

Technical data
WF 15i
Supply voltage 24 V DC / 60 V DC
Nominal current 0,5 A / 1 A
Welding current at 10 min / 40 °C (104 °F) 40 %
D.C.*
60 %
D.C.*
100 %
D.C.*
650 A 600 A 500 A
Maximum shielding gas pressure 7 bar
101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar
72.53 psi
Wire feed speed 0,5 - 15 m/min
19.68 - 590.55 ipm
Wire drive 4-roller drive
Wire diameter 0,8 - 2,4 mm
.03 - .09 in.
Wirespool diameter max. 300 mm
max. 11.81 in.
Wirespool weight max. 19 kg
max. 41.89 Ib.
Degree of protection IP 23
Mark of conformity S / CE
Dimensions l x w x h 658 x 282 x 362 mm
25.91 x 11.10 x 14.25 in.
Weight 13 kg
28.66 Ib.
*) D.C. = duty cycle
WF 15i n.S.
Supply voltage 24 V DC / 60 V DC
Nominal current 0,5 A / 1 A
Welding current at 10 min / 40 °C (104 °F) 40 %
D.C.*
60 %
D.C.*
100 %
D.C.*
650 A 600 A 500 A
Maximum shielding gas pressure 7 bar
101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar
72.53 psi
Wire feed speed 0,5 - 15 m/min
19.68 - 590.55 ipm
Wire drive 4-roller drive
65
EN