FS0507T PN 60711000162
③ The current charging mode is repeatedly displayed (example: P → 0 → 1).
④ Release the selection button.
⑤ Press the selection button again, and keep pressing the selection button until you
jump to the display mode you want to set.
⑥ After the selection is completed, press and hold the selection button.
When the display and all indicators are on, release the selection button. The setting is
completed.
⑧ After turning off the charger switch and turning it on again, check the charging
mode.
5.5.7 Charger status description
Use the following table to determine the status of the charger.
To Next Page
Loading...