INSTALLATION INSTRUCTIONS
SIDE SHELF WITH UTILITY DRAWER
1. Locate uninstalled side shelf with utility drawer, and remove packaging materials.
2. Pull the drawer all the way out from shelf. Press the drawer slide release levers, and
remove drawer. (See Fig. 1 & 2)
3. Locate and loosen (but don't remove) the four (4) side shelf bolts on the left side
of the grill using a socket wrench or adjustable wrench (See Fig. 3) allow approximately
1/4" space between the bolt head and side of grill.
4. Attach the left side shelf by lining up the side shelf keyhole slots on the right-hand side
of shelf with the 4 bolts on the side of the grill, and slide onto the bolts (See Fig. 4).
5. Tighten the 4 bolts firmly to secure the side shelf to the side of the grill.
6. Re-install the drawer into the side shelf.
Slide Release
Lever
Fig. 1 Fig. 2
Fig. 3
Fig. 4
8
To Next Page
Loading...