MATCH LIGHTING INSTRUCTIONS
17
TO MATCH LIGHT THE GRILL:
1. Locate Match Extender Lighting Rod found inside left grill door.
NOTE: If you have just attempted to light the burner with the igniter, allow 5 minutes
for any accumulated gas to dissipate.
2. Simply place a match between the coils on the end of the extension rod.
Keep your face and hands as far away from the grill as possible.
3. Light the match and insert through the cooking grids to the burner.
4. Press & turn the control knob left to the "HI" setting. Continue to press the knob until
the burner ignites. Burner should light immediately.
If the burner does not light in 4 seconds turn the control knob to "OFF".
Wait 5 minutes and try again.
If the burner does not light after several attempts, turn the control knob
to "OFF", and check the "TROUBLESHOOTING" section of this manual.
DO NOT ATTEMPT TO LIGHT THE GRILL
IF THE ODOR OF GAS IS PRESENT.
To Next Page
Loading...