INSTALLATION INSTRUCTIONS
M
ake sure all packing material is removed from the grill, including the burner tie-down straps.
ELECTRONIC IGNITION BATTERY INSTALLATION
The electronic ignition required one AA battery be installed to operate. To install the
battery included with the grill: 1) Remove the battery box housing by loosening the threaded cap;
2) Install the battery with the positive pole facing toward you; 3) Replace and tighten the
battery box cap after the battery is installed.
INSTALLATION OF WARMING RACK
Install the warming rack on to the warming rack bracket.
7
+
P
1
2
3
Warming Rack
Bracket
To Next Page
Loading...