MAINTENANCE(cont’d)
• Make sure attachment is properly secured,
adjusted, and in good operating condition.
• Before leaving operator’s seat, lower lift arms
and put attachment on the ground. Engage
brake, stop engine, remove key, and remove
seat belt.
• Never perform service or maintenance with
engine running.
• Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
• Tighten all bolts, nuts, and screws to torque
chart specifications on page 19. Check that all
cotter pins are installed securely to ensure
equipment is in a safe condition before putting
unit into service.
STORAGE
• Block equipment securely for storage.
• Keep children and bystanders away from stor-
age area.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
7 Safety Rules
To Next Page
Loading...
