Frontier DH3499 - Page 13

Dealer Instructions 10
DH32 Gang Assembly
Figure 1
A - Measurement from the side of the
frame to the edge of disc blade.
B - Measurement from end of gang beam
to center of u-bolt in hanger.
#5TLT1001 FRONT & REAR GANG BEAM
5” X 3” X ¼” TUBE X 63”
#5TL11686 FRONT & REAR GANG BEAM
5” X 3” X ¼” TUBE X 72”
#5TLT1003 FRONT & REAR GANG BEAM
5” X 3” X ¼” TUBE X 81”
#5TLT1005 FRONT & REAR GANG BEAM
5” X 3” X ¼” TUBE X 90”
#5TLT1007 FRONT & REAR GANG BEAM
5” X 3” X ¼” TUBE X 99”