Frontier ST0726 User Manual

OPERATION
16
MTF--051056L
HOW TO SET THE DRIFT CUTTERS
(OPTIONAL ACCESSORY ON SOME MODELS)
Drift cutters are used to cut a path through snow deeper than
the auger housing.
1. Loosen the wingnuts that secure the drift cutters to the
auger housing (see Figure 16).
2. Raise the drift cutters to the desired height.
3. Tighten the wingnuts.
Drift Cutter
Wingnut
Figure 16

Frontier ST0726 Specifications

General

Brand	Frontier
Model	ST0726
Category	Snow Blower
Language	English