5.04 - Suggested Spare Parts
It is suggested that the following spare parts be kept on hand at all times to prevent a
minor problem from delaying work:
1 setChains
10Nuts
10Blade bolts
5Tilling Blade - Left
5Tilling Blade - Right
6Aerating blades
QuantityDescription
5.05 - Storage
After seasonal use it is important to perform the following for prolonged storage:
1. If the machine is not supplied with the optional gauge wheels or front roller, lower the
stand and pin in its lowest position (see fig. 13).
2. Wash the Green-Rite carefully, especially inside the hopper.
3. Inspect the Green-Rite and replace worn or damaged parts.
4. Tighten all hardware.
5. Grease all areas indicated under Maintenance
13
.
6. Touch up scratches by sanding the area and applying a light coat of primer and paint
to prevent rust from forming.
7. Cover the Green-Rite from the elements in order to have it in perfect condition for
the start of the next season.
8. Make sure all parked machines are on a hard, level surface, and engage all safety
devices.
9. Do not permit children to play on or around the stored unit.
WARNING: Be sure to store the implement on a hard level surface and away from
people especially children.
The machine demolition operations should be carried out in compliance with all federal,
state and local environment protection laws.
REPAIR PROCEDURES 37 FRONTIER
A
ERATOR-OVERSEEDER OPERATOR’S MANUAL
13
See Chapter 4 - Maintenance.
To Next Page
Loading...