Frontier TR2058 - Page 39

Check for trash or mud buildup on roller
end.
Roller not clean.Roller not turning
freely.
Check for foreign matter lodged in seed
cup sprocket.
Seed cups might be
obstructed.
Seed cup sprocket
locked up or twisted
seed cup drive
shaft.
Seed treatment will affect seeding rate if
the chemicals build up in seed cup.
Unless cleaned regularly, this buildup
can cause breakage of the seed cup
shaft.
Seed cups might be
obstructed.
Actual seeding rate
is different than
desired.
Check for plugging in seed cup.
Reduce ground speed.
Check for trash or mud buildup on roller.
Seed cups might be
obstructed.
Ground speed too fast.
Roller not clean.
Uneven seed
distribution.
SOLUTIONPOSSIBLE CAUSEPROBLEM
TROUBLESHOOTING 39 FRONTIER
A
ERATOR-OVERSEEDER OPERATOR’S MANUAL