S5850 AND S8050 SERIES SWITCHESRESET AND RECOVERY SYSTEM CONFIGURATION GUIDE
NOTE:
1. Attention should be paid to the following issues when loading images through TFTP servers :
Ensure that you are properly configured as a TFTP server;
Ensure that Switch routes to TFTP servers are accessible. If there is no router for routing communication between
subnetworks, switches and TFTP servers must be in the same network;
Make sure that the configuration files you want to download are in the correct directory on the TFTP server;
Download operation to ensure that the file's permissions are set correctly.
2. After successfully entering the system, it is still necessary to download the upgrade package from the TFTP server to the
switch system folder according to the routine process. And specify the upgrade package as the next load project for the
system to start. For more information, please refer to the S5850 and S8050 Series Switches FSOS Software Upgrade Guide.
3.5 Switch to FactoryReset
Switch# clear startup-config
Are you sure to delete startup configuration file? [yes/no]: yes
Switch# reboot
Building configuration...
Startup config file is not exist. Copy running config to Startup config? [yes/no]:no
Reboot system? [confirm]
To Next Page
Loading...
Need help?
General
