FSCurtis ICommand-Touch
V1.15
01.08.2016
6
2
Control System Use and Connection
2.1
Standard function
Figure 1: FSCurtis ICommand-Touch. The actual design of the membrane keyboard may vary from the
one
shown in this figure.
The ICommand-Touch is an intelligent compressor control system which can be
extended.
It can be used for oil-lubricated screw compressors with a fixed speed and for converter
machines. Lento (oil-free) compressors can also be controlled with an extra module which
extends the input / output level.
The ICT also has a basic load cycle function to ensure equal utilization in up to five
compressors at the same time (ICT as basic load cycle master with up to 4 basic load
cycle slaves).
All settings can be made via the graphic interface in the code-protected menu system.
The base screen display provides a quick overview of the system type and status at all
times.
Extra information such as progression charts and compilations of all pressure and
temperature values can be quickly accessed by simply tapping on them.
Replacement battery p/n: F1481503
To Next Page
Loading...