FSI AM210 - OSD Menu

© 2015 Flanders Scientic, Inc.
30
Return to Table of Contents
OSD Menu
Main Menu OSD
Function Status Display 5 Sec.
Scopes & Audio Meters Menu Pos. Top Right
Video Status Pos. Top Left
Audio Rotary Pos. Bottom
Marker Source ID Off
System Source ID Position Bottom
Alarm Source ID Character CAM1
OSD Time Code Off
GPI Time Code Size Small
Display Alignment Time Code Position Top
System Status Time Code Bg Translucent Black
Support
Status Display
Toggles settings for pop up window indicating resolution and frame rate of source when input button is pressed or a new
signal type is routed to monitor. Setting this option to Off turns the Status Display function completely off, setting to 5 Sec.
enables a 5 second onscreen status display when the input button is pressed or source format is changed, and setting to
On leaves the Status Display onscreen permanently.
Menu Pos.
Changes position of onscreen menu between three choices: Center, Top Left, or Top Right.
Status Pos.
Changes position of onscreen status display window. Select from Top Left, Top Right, Bottom Left, Bottom Right, or Center.
Rotary Pos.
Changes position of onscreen window indicating status of Volume, Contrast, Phase, Brightness, Chroma, etc. during
adjustment. Select from Top, Center, or Bottom.
Source ID
Allows you toggle source ID function on/off. The Source ID function can be used to set a manual onscreen label of up to 5
characters. This is often used to allow for the labeling of a monitor as PGM, PVM, CAM, etc. without using placards or tape.
Source ID Position
Changes position of onscreen Source ID function.
Source ID Character
Allows you to customize text for Source ID label using ENTER, UP, and DOWN buttons.
Time Code
Allows you to select whether to display Time Code on screen pulled from an HD/SD-SDI signal. Select between Off, LTC,
VITC 1, or VITC 2. Please note that Time Code cannot be displayed at the same time as Scopes, Markers, or other onscreen
ancillary functions.
Time Code Size
Allows you to toggle between Large or Small Timecode Display.
Time Code Position
Use this toggle to change the onscreen position of Time Code.