SAFETY AND HANDLING
53
ALWAYS OBSERVE START UP AND SHUT DOWN PROCEDURES!
SAFETY CONSIDERATIONS
Safety in the use and maintenance of equipment and chemicals requires observance of ALL PROCEDURES
for handling the chemical components and equipment. Consideration must be given to the fact that the
chemical cylinders and equipment are under pressure.
GENERAL
Do not point assembled dispensing unit at anyone.
Always have unit pointed away from you when servicing.
Keep equipment clean.
Use extreme caution when performing maintenance on equipment.
Minimize the exposure of A-SIDE components to atmosphere.
Always contact FSI for assistance in relieving pressure on cylinders and equipment.
DON’T GUESS! If unsure of anything, don’t hesitate to call for assistance. FSI is dedicated to
helping its customers.
CLOTHING
Wear protective eyewear (safety glasses).
Wear protective gloves.
Wear safety shoes when moving or handling heavy items.
Avoid contact with foam chemicals or curing foam.
Vapor concentrations of isocyanate (A-SIDE) and other volatile chemicals, including solvents used in
solvent cleaning, must be maintained below the current limits established by the Occupational Safety and
Health Administration, United States Department of Labor, and by state or local government agencies
having jurisdiction.
Wear an approved respirator or forced air-fed mask when foaming is carried out in enclosed and poorly
ventilated areas. Occupational Safety and Health Act regulations should be consulted regarding the use
of respirators.
www.foamsupplies.com | www.ecomatetechnology.com | 1.800.325.4875