FT KT Series - Precautions for Operation; Precautions for Maintenance and Inspection; Location of the Warning Labels

2
1.2.2 Precautions for operation
(1) Before starting the fan, ensure that all the relevant workers are informed of the operation
and that there are no workers in the dangerous zone.
(2) Only those who are authorized by the site manager are allowed to operate the fan.
(3) Be sure to attach the terminal box cover of the motor before turning on the power.
(4) When the fan is running, never touch any parts of the unit unless it is absolutely necessary.
(5) Do not put your fingers or other objects into the air intake or exhaust vents.
(6) Do not put your fingers or other objects into the opening of the motor. Failure to observe
this may cause an electric shock, injury, or fire.
(7) Do not place any objects around the air intake or exhaust vents of the fan.
(8) Remove any tools and other objects from the top of the fan before operation.
(9) Be sure to attach a belt guard or a shaft coupling to the fan during operation.
(10) If the gas is hot, do not touch the fan body as it can also be hot.
1.2.3 Precautions for maintenance and inspection
(1) Maintenance and inspection must be carried out only by personnel who have been trained
to handle the fan.
(2) Before starting maintenance or inspection, ensure to inform the relevant personnel of the
operation.
(3) Before starting the maintenance or inspection work, ensure to stop the fan and turn off the
main power on the operation panel.
If you carry out the maintenance or inspection work with the power on, you may suffer an
electric shock and/or get injured by unexpected activation of the fan during the work.
(4) In case dust or oil components adhere to the fan, clean the fun regularly.
Failure to observe this may cause malfunctions, damage, or accident.
(5) Consult Atai Fuji Motor. or a service company before moving, repairing, or modifying the fan.
1.3 Location of the warning labels
The figure below shows the locations to which each warning label should be affixed. If these
labels become dirty and hard to read or if they are peeled off, replace with a new one.
Warning
Follow all warnings on the labels affixed to the fan and those in the
instruction manual.