FTS CHARPYCOOL - The Solo Controller; Display and Indicators; Adjusting Bath Temperature

Operation
FTS Systems CharpyCool™
8 Rev 001, 01/12
© SP Scientific 2012
The Solo Controller
The CharpyCool™ includes a proportional-integral-derivative (PID) microprocessor
controller. The Solo controller features a bright, two-line, two-color, seven segment
LED readout.
Display and Indicators
Process Value (PV) Display
Displays the current fluid temperature in the bath.
Set Value (SV) Display
Displays the desired fluid temperature.
Adjusting Bath Temperature
Press the Up and/or Down buttons to increase and decrease the fluid 1.
temperature shown on the SV Display.
Press the Set button to select the displayed value. 2.
Set Button
Process Value (PV)
Display
Set Value (SV) Display
Rotate Button
Up Button
Down Button
Status Indicator Area