Rev 001, 01/12 1
© SP Scientific 2012
1
Introduction
Overview
The FTS Systems CharpyCool™ delivers rapid cooling capabilities, as well as
continuous operation at temperatures as low as -112 °F (-80 °C). Built to provide you
with years of smooth, quiet and reliable operation, the FTS Systems CharpyCool™
packs both performance and innovation into a compact, bench-top design.
Utilizing a liquid medium, the FTS Systems CharpyCool™ rapidly and thoroughly
chills samples without the use of expendables such as dry ice or liquid nitrogen
(N
2(liq)
).
The FTS Systems CharpyCool™ includes temperature control and also includes a
variable speed-controlled magnetic stirrer to provide more accurate temperature
control and uniformity. The CharpyCool™ features an air-cooled refrigeration system
and stainless steel reservoir.
THE FLUID AND INNER WALLS OF THE RESERVOIR CAN REACH TEMPERATURES BELOW
-130 °F (-90 °C). EXTREMELY LOW TEMPERATURES CAN CAUSE SERIOUS AND
IMMEDIATE DAMAGE TO SKIN. THE ABSENCE OF FROST IN UNITS EQUIPPED WITH THE
FROST ISOLATING WARMING LOOP SHOULD NOT BE MISTAKEN AS AN INDICATION OF
WARM TEMPERATURE. DESPITE THE ABSENCE OF FROST, THE TEMPERATURE OF THE
RESERVIOR FLUID AND WALLS MAY BE DANGEROUSLY LOW.
THE FTS SYSTEMS CHARPYCOOL™ IS NOT INTENDED FOR USE WITH EXTREMELY
FLAMMABLE FLUIDS SUCH AS ISOPENTANE (C5H12).
Key Features
Quiet operation. •
Mechanically refrigerated, no expendable refrigerants utilized. •
Compact, bench-top design with 4 or 8 liter stainless steel reservoir. •
Lift-off lid for easy bath access. •
To Next Page
Loading...
