FUELL Flluid 1S - Maintenance Plan

Flluid 1
65
Components Every 6 Months
or 500 km
Every 12
months
Check tires for damage x x
Check tire air pressure x x
Check wheels for concentricity, retighten spokes if necessary x x
Check brake system for function x x
Check brake pads x x
Check steering bearing x x
Check handlebar / stem for tightness x x
Check saddle / seatpost for tightness x x
Check frame / fork for damage x x
Check gear shifter x x
Check cables x x
Check drive belt x x
Check all other bolts and nuts for tightness x x
Check electrical drive system; Check connectors for tightness; Magnetic disk / sensor distance (2-3 mm) x x
Check lighting / reectors x x
Check rear wheel track x x
Recharge battery with original charger if necessary x x
MAINTENANCE PLAN
The work specied in the maintenance plan includes - as far as necessary - the cleaning, lubrication and adjustment of the respective
components or the replacement of components in case of wear or damage. Fuell Inc. recommends that it be performed by an Authorized
Service Center. In extreme operating conditions or intensive use, we recommend maintenance every 6 months.
SERVICE