INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
10
Device Setting
To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]
window, select the external device and click [Settings] .
To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add
Device] to add another External Device.
External Device Settings
To configure communication settings, use the PRG, FUNC/DATA, Up, Down, or SHIFT key on the touch panel
located on the front of the External Device. Refer to your External Device manual for details.
1 Turn ON the power of the External Device.
2 Press the PRG key to move to the program menu.
3 Select [1. DATA SET], and press the FUNC/DATA key.
4 Press the Up, Down, or SHIFT key to select the function code you want to set.
5 Press the FUNC/DATA key.
6 Press the Up, Down, or SHIFT key to display the setting value.
7 Press the FUNC/DATA key.
8 Press the PRG key to move to the operation mode.
9 Reboot the External Device.
This completes the External Device settings.
Function Code Setting Setup Description
H31 1 Station address
H34 1 Speed
H35 0 Data length selection
H36 0 Parity bit selection
H37 0 Stop bit selection
To Next Page
Loading...
