Fuji Electric FRENIC-Lift FRN0019LM2A-4 User Manual

Instruction Manual
LM2A series
■Three-phase 400 V ： FRN0006LM2A-4□ to FRN0091LM2A-4□
■Single-phase 200 V ： FRN0011LM2A-7□/FRN0018LM2A-7□
Thank you for purchasing our FRENIC-Lift LM2A series of inverters.
• This product is designed to drive three-phase induction motors and three-phase permanent magnet
synchronous motors. Read through this manual to become familiar with the handling procedure and
correct use.
• Improper handling might result in incorrect operation, short life cycle, or failure of this product as well as
the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is
discarded.
• For instructions on how to use an optional device, refer to the instruction and installation manuals for that
optional device.


Fuji Electric Co., Ltd. INR-SI47-1894d-E

Fuji Electric FRENIC-Lift FRN0019LM2A-4 Specifications

General

Brand	Fuji Electric
Model	FRENIC-Lift FRN0019LM2A-4
Category	Inverter
Language	English

Summary

Chapter 1 BEFORE USE

Precautions for Using Inverters

Usage and Storage Environment

Chapter 2 MOUNTING AND WIRING THE INVERTER

Installing the Inverter

Wiring

Detailed steps and precautions for electrical wiring.

Chapter 4 RUNNING THE MOTOR FOR A TEST

Checking Prior to Powering ON

Configuring Function Code Data

Setting up operational parameters and motor data.

Motor Operation Check

Performing test runs to verify motor operation.

Chapter 5 TROUBLESHOOTING

Alarm Codes

Lists and explains various alarm codes and their meanings.

Chapter 6 MAINTENANCE AND INSPECTION

Periodic Inspection

Chapter 7 SPECIFICATIONS

Standard Model Specifications

Technical data and ratings for the product series.

Chapter 8 CONFORMITY WITH STANDARDS

EMC and Low Voltage Directive Compatibility

European Standards Compliance

EMC Standards Compliance

Guidelines for installing to meet EMC requirements.

Functional Safety Standard Compliance

Safety features and compliance standards.

Canadian and U.S. Standards Compliance