Fuji Electric FRENIC-Lift series User Manual

Instruction Manual
Designed for Elevating Machinery
Thank you for purchasing our FRENIC-Lift series of inverters.
• This product is designed to drive a three-phase induction motor and synchronous motor. Read through this
instruction manual and be familiar with the handling procedure for correct use.
• Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as
the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is
discarded.
• For how to use an option card, refer to the installation and instruction manuals for that option card.
Fuji Electric Co., Ltd. INR-SI47-1038g-E

Fuji Electric FRENIC-Lift series Specifications

General

Brand	Fuji Electric
Model	FRENIC-Lift series
Category	Inverter
Language	English

Summary

Chapter 1 BEFORE USING THE INVERTER

1.1 Acceptance Inspection

Check package contents, inverter condition, and model accuracy.

Chapter 2 MOUNTING AND WIRING OF THE INVERTER

2.1 Operating Environment

Specifies environmental conditions required for inverter installation and operation.

2.2 Installing the Inverter

Details on mounting base, clearances, and installation directions.

2.3 Wiring Procedures

Step-by-step instructions for connecting main circuit, control circuit, and other terminals.

Chapter 3 OPERATION USING THE KEYPAD

Using the Optional Multi-function Keypad

Explains how to operate the inverter using the optional multi-function keypad.

Chapter 4 RUNNING THE MOTOR

4.1 Running the Motor for a Test

Procedures for initial inspection, power-on checks, and test running the motor.

Chapter 5 FUNCTION CODES

5.1 Function Code Tables

Comprehensive list and explanation of function codes for inverter setup and customization.

Chapter 6 TROUBLESHOOTING

6.1 Before Proceeding with Troubleshooting

General steps and safety warnings before starting troubleshooting.

6.2 Troubleshooting Without Alarm Codes

6.3 Troubleshooting With Alarm Codes

6.4 Abnormal LED Monitor Patterns

Chapter 7 MAINTENANCE AND INSPECTION

Chapter 8 SPECIFICATIONS

8.1 Model Specifications

8.2 Common Specifications

8.3 Terminal and Wiring Details

8.5 Protection Features

Chapter 9 LIST OF PERIPHERAL EQUIPMENT AND OPTIONS