To Next PageTo Next Page
Need help?Do you have a question about the Fuji Electric FRENIC5000 G9S Series and is the answer not in the manual?
General| Output Frequency | 0.1 to 400Hz |
|---|---|
| Power Range | 0.4kW to 630kW |
| Control Method | V/f control |
| Communication Protocols | Modbus RTU, Profibus DP, DeviceNet |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit |
| Cooling Method | Forced air cooling |
| Overload Capacity | 150% for 60 seconds |
| Ambient Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000m above sea level |
| Enclosure Rating | IP20 |
| Series | FRENIC5000 G9S |
Guidelines for safe installation, connection, operation, and maintenance of the DB unit.
Detailed steps and precautions for physically installing the DB unit.
Guidelines and warnings for correctly connecting the DB unit's electrical wiring.
Procedures and safety checks for operating the DB unit correctly.
Specific safety cautions and requirements when using the DB unit according to UL/cUL standards.
Specifications for screw tightening torques and recommended wire sizes for connections.
Guidance on the physical mounting and placement of the DB unit for optimal performance.
Steps for connecting the DB unit to the inverter and other components.
Final checks and preparations required before powering on and operating the DB unit.
Description of the DB unit's internal protective functions and abnormalities.
Key technical specifications of the DB unit, including ratings and performance data.
