1-1
Front cover
Under of Unit(Mounting bord)
Fig. 1-1-1 Ratings nameplate
1 Before Using This Product
1-1 Inspection at receiving the unit
Unpack and inspect the unit for the following items.
If there are doubtable or complained items, contact the
distributor where the unit was purchased or the Company's
sales office nearby.
① Check for the unit to be the ordered product by
inspecting the ratings nameplate.
TYPE : Type of the dynamic braking unit
COOLING : Cooling system
SOURCE : Power rating
OUTPUT : Output rating
MASS : Mass of the product
SER.No. : Serial number
4
3 HH12345R678-001H
Production lot serial number:
Production month: 1--9 →Jan. --Sep.
X→Oct. Y→Nov. Z→Dec.
Production year : Last digit of year 8→1998
② Inspect if shipping damage such as damage or fall-off of the parts and depression of the cover or body.
③ Braking resistor is not attached. Prepare a resistor conforming with the specification separately.
1-2 Appearance
Nameplate
Warning
label
Front
cover
Fig. 1-2-1 Appearance
Fig. 1-2-2 Warning label
BU 37 - 4 C
Standard series: C
AC power supply voltage series: 2→200V series、4→400V series
Rated output of the applied motor for the inverter as standard: 37→37kW
Product type