INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
31
4.2 Setup Items in Off-line Mode
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in off-line
mode. Touch the External Device you want to set from the displayed list.
• Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line
mode or about the operation.
Cf. Maintenance/Troubleshooting Manual "Off-line Mode"
• The number of the setup items to be displayed for 1 page in the off-line mode depends on the
Display in use. Please refer to the Reference manual for details.
Setup Items Setup Description
SIO Type
Select the SIO type to communicate with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial
interface specifications of the Display.
If you select an SIO type that the serial interface does not support, proper
operation cannot be guaranteed.
Refer to your Display manual for details on the serial interface specifications.
Speed Select the communication speed between the External Device and the Display.
Data Length Select the data length.
Parity Select how to check parity.
Stop Bit Select the stop bit length.
Flow Control
Select a communication control method to prevent transmission and reception data
overflow.
continued to next page
To Next Page
Loading...
