Fuji Electric FRENIC5000G11S Series - Page 49

INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
49
2A)
• 1:1 Connection
• 1:n Connection
• For 1:n connection, set the termination resistance switch on the External Device located at the
end to ON.
• The recommended branch adapter is the SK KOHKI's MS8-BA-JJJ.
RDA
SDA
SDB
CA3-ADPCOM-01
CA3-ADPTRM-01
Display
RJ-45 connector
TRM
RDB
DX(+)
DX(-)
Display side
Signal name
Signal name
External Device side
User-created cable
RDA
SDA
SDB
CA3-ADPCOM-01
CA3-ADPTRM-01
RJ-45 connector
TRM
RDB
DX(+)
DX(-)
User-created cable
DX(+)
DX(-)
DX(-)
DX(+)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
Display
Display side
Signal name
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
External Device side
Signal name
RJ-45 connector
External Device side
Signal name
Branch
Adapter
Branch
Adapter