Fuji Electric FRENIC5000G11S Series - Page 51

INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
51
2C)
• 1:1 Connection
• 1:n Connection
• For 1:n connection, set the termination resistance switch on the External Device located at the
end to ON.
• The recommended branch adapter is the SK KOHKI's MS8-BA-JJJ.
RDA
SDA
SDB
CA4-ADPONL-01
CA3-ADPTRM-01
Display
Display side
TRM
RDB
DX(+)
DX(-)
Signal name
RJ-45 connector
Branch Adapter side
Signal name
User-created cable
RDA
SDA
SDB
CA4-ADPONL-01
CA3-ADPTRM-01
TRM
RDB
DX(+)
DX(-)
DX(+)
DX(-)
DX(-)
DX(+)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
RJ-45 connector
Display
Branch Adapter side
Signal name
Branch
Adapter
Signal name
Display side
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
Branch
Adapter
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
External Device side
Signal name
RJ-45 connector
External Device side
Signal name
User-created cable