Fuji Electric FRENIC5000G11S Series - Page 56

INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
56
2H)
• 1:1 Connection
• 1:n Connection
• The 5V output (Pin #6) on the Display is the power for the Siemens AG’s PROFIBUS
connector. Do not use it for other devices.
• For 1:n connection, set the termination resistance switch on the External Device located at the
end to ON.
• The recommended branch adapter is the SK KOHKI's MS8-BA-JJJ.
• In COM on the GP-4107, the SG and FG terminals are isolated.
100
(1/2W)
DX(+)
DX(-)
RJ-45 connector
External Device side
Ω
Display
Termination
resistance
Signal name
Pin
Signal name
NC
NC
GND(SG)
RS(RTS)
5V
NC
NC
FG
LINE(+)
LINE(-)
3
8
1
2
5
4
6
7
9
Shell
Display side
D-Sub 9pin (plug)
100
(1/2W)
DX(+)
DX(-)
DX(+)
DX(-)
DX(-)
DX(+)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
User-created cable
RJ-45 connector
Display
Branch Adapter side
Signal name
Branch
Adapter
Ω
Termination
resistance
RJ-45 connector
External Device side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
Branch
Adapter
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
External Device side
Signal name
Pin
Signal name
NC
NC
GND(SG)
RS(RTS)
5V
NC
NC
FG
LINE(+)
LINE(-)
3
8
1
2
5
4
6
7
9
Shell
Display side
D-Sub 9pin (plug)