Fuji Electric FRENIC5000G11S Series - Page 58

INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
58
2J)
• 1:1 Connection
• 1:n Connection
Number Name Notes
(1)
RJ45 RS-485 Cable (5m) by Pro-face
PFXZLMCBRJR81
• For 1:n connection, set the termination resistance switch on the External Device located at the
end to ON.
• The recommended branch adapter is the SK KOHKI's MS8-BA-JJJ.
DX(+)
DX(-)
RJ-45 connector
External Device side
Signal name
Display
D0
D1
(1)
DX(+)
DX(-)
DX(+)
DX(-)
DX(-)
DX(+)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
DX(+)
DX(-)
User-created cable
RJ-45 connector
Branch Adapter side
Signal name
Branch
Adapter
RJ-45 connector
External Device side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
Branch
Adapter
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Branch Adapter side
Signal name
RJ-45 connector
Terminal
resistance: OFF
Terminal
resistance: ON
External Device side
Signal name
Display
D0
D1
(1)