INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
8
2 External Device Selection
Select the External Device to be connected to the Display.
Setup Items Setup Description
Number of Devices/PLCs
Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the
display.
Manufacturer
Select the manufacturer of the External Device to connect. Select "Fuji Electric
Co.,Ltd.".
Series
Select the External Device model (series) and the connection method. Select
"INVERTER SIO".
In System configuration, make sure the External Device you are connecting is
supported by "INVERTER SIO".
)"1 System Configuration" (page 3)
Port Select the Display port to be connected to the External Device.
Use System Area Not available in this driver.
To Next Page
Loading...
