EasyManua.ls Logo

Fuji Electric MICREX-SX Series SPH - Seciton3 Adaptation to UL Standard; Lloyds Resister of Shipping; NK; Adaptation to UL Standard; Adaptation to Lloyds Resister of Sipping; NK

Fuji Electric MICREX-SX Series SPH
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-1
Section3
Adaptation to UL standard / Lloyd's Register of Shipping / NK
3-1 Adaptation to UL standard
No restriction
3-2 Adaptation to Lloyd's Register of Shipping / NK
Ship standards such as Lloyd's Register of Shipping and NK (Nippon Kaiji Kyokai) are almost the same as that for CE
marking, except that vibration- related rules are more severe in the former than in the latter.
Therefore, when a MICREX-SX Series product is used for marine equipment, tightly wind a strong nylon band around the
entire PLC so that the modules come in close contact with each other, as shown in the figure below.
A guideline for checking the propriety of the contact is whether or not a name card can be inserted in between the mod-
ules.
Fix by tightly winding a nylon band
around the SX.
After fixing with a nylon band, check to see that a
name card cannot be inserted in the gap be-
tween the modules.

Related product manuals