Need help?Do you have a question about the Fuji Electric NP1L-RS5 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Type | RS-485 Communication Module |
| Communication Standard | RS-485 |
| Number of Channels | 1 |
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Baud Rate | 9600 bps |
| Insulation Method | Photocoupler insulation |
| Operating Temperature | 0 to 55 °C |
Provides essential safety measures to prevent injury or damage from incorrect handling.
Details specific precautions to avoid minor injuries or physical damage during operation.
Details RS-232C and RS-485 communication parameters and indicators.
Identifies module components like LEDs, switches, and ports, explaining their functions.
Illustrates various connection methods like 1:1, 1:N, and independent port configurations.
Details communication parameters, FB format, and terminal assignments for non-procedural FBs.
Covers setting communication parameters and understanding initialization results via OPEN status.
Describes the procedures for sending and receiving data, including status lists.
Provides a step-by-step guide for developing communication programs using FBs.
Details how to assign values to communication parameters and write send data.
Illustrates how to connect variables to FB terminals for starting operations and data transfer.
Provides detailed connection diagrams and pin assignments for RS-485 and RS-232C ports.
Provides specific commands for reading, writing, starting, stopping, and resetting CPUs.
To Next Page
