Fuji Electric NP1L-RS5 - Receiving Status List; Data Receiving Procedure

4-14
4-5 Data Receiving
4-5-2 Receiving status list
.oN gniviecerfotluseR skrameR
'00'yllamrondednE
'10'devreseR
'20'.dewolfrevosahreffubevieceR
'30'devreseR
'40'devreseR
'50'devreseR
'60'devreseR
'04'devreseR
'14'devreseR
'24'rorreCCB
'09'.detcennocsideludomnoitacinummocesopruplareneG
'19'rorrednessubXS
'29'rorreeviecersubXS
'0A'
rorretroptcejbO noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'3A'
.edomnoisrevnocedocniesuacebelbissopmignissecorP noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'5A'
.edomredaolniesuacebelbissopmignissecorP noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'6A'
gniebsisisongaid-flesesuacebelbissopmignissecorP
.detucexe
noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'0C'
gniviecergniruddetcetedrorreerawdraH
).cte,rorregnimnarF,rorreytiraP(
noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'1C'
.dewolfrevosahreffubevieceR noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'2C'
.dewolfrevosahreffubdneS noitacinummocesopruplarenegnonoitcetedrorrE
eludom
'3C'
revoezisataddneS noitacinummocesopruplarenegnonoitcetedrorrE
eludom
Note: Receiving conditions
The processing for receiving differs with the setting of parameter “Frame detection.”
None: Receiving completes when data is received.
Fixed length: Receiving completes when receive data reaches the specified number of receive data bytes.
Variable length: Receiving completes when the data in a range between start and end codes is received.