Need help?Do you have a question about the Fuji Electric MICREX-SX SPH Series and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Product Series | SPH |
| Manufacturer | Fuji Electric |
| Series | MICREX-SX |
| Communication Ports | Ethernet, RS-232, RS-485 |
| Programming Language | Function Block Diagram |
| Power Supply Voltage | 24V DC |
| Type | PLC |
Classifies safety items into Warning and Caution, emphasizing thorough reading before use.
Details critical safety instructions, handling of charged circuits, and power OFF procedures to prevent severe injury or death.
Details safety instructions for minor injuries or physical damage, covering environmental factors and proper usage.
Provides physical, electrical, and environmental specifications for the communication modules.
Details RS-232C and RS-485 interface specs, transmission speeds, and status LEDs.
Identifies module components and explains functions of status LEDs and selection switches.
Illustrates connection methods: 1:1, 1:N, and loader network configurations.
Describes procedures for checking internal memory, LEDs, and communication completeness.
Explains initializing communication ports by setting parameters to match external devices.
Outlines steps for creating communication programs using non-procedural FBs.
Guides through installing the standard extended FB from the D300win software package.
Details assigning communication parameter values to variables connected to the PARA terminal.
Explains writing send data into variables connected to the S_DAT terminal.
Describes programming for FB terminals, including starting and data operations.
Details wiring procedures for RS-485 (2-wire/4-wire) and RS-232C connections.
To Next Page
