App.2-8
Appendix 2-3 Loader Command Details
Appendix 2-3-6 Batch Reset of CPUs
1) Function
This command Resets all the CPUs in the configuration at one time.
This command is executed regardless of the key switch position of the CPU.
2) Command/mode code
Command: 04h, Mode: 03h
3) Data format of request command/response command
None
4) Batch reset command of CPUs
When resetting all the CPUs at one time, request and response commands are as shown below.
Request command : FF7A0000110000000000040300010000
Response command : 007A0000110000000000040300010000
Appendix 2-3-7 Individual Start of CPU
1) Function
This command activates a specified CPU in the configuration separately.
Each CPU cold-starts or warm-starts depending on the condition. If the specified CPU has already been activated, an
error result. CPU specification is made with the connection mode and connection ID.
2) Command/mode code
Command: 04h, Mode: 04h
3) Data format of request command/response command
None
4) Example of individual start command of CPU
When activating a CPU separately (CPU1 in a multi-CPU system), request and response commands are as shown below.
Request command : FF7BFD00110000000000040400010000
Response command : 007BFD00110000000000040400010000
Appendix 2-3-8 Individual Initialization Start of CPU
1) Function
This command Initializes and activates a specified CPU in the configuration separately.
The specified CPU cold-starts. If the specified CPU has already been activated or the key switch is set to the RUN/STOP
position, an error result. CPU specification is made with the connection mode and connection ID.
2) Command/mode code
Command: 04h, Mode: 05h
3) Data format of request command/response command
None
4) Example of individual initialization start command of CPU
When initializing and activating a CPU separately (CPU1 in a multi-CPU system), request and response commands are
as shown below.
Request command : FF7BFD00110000000000040500010000
Response command : 007BFD00110000000000040500010000
To Next Page
Loading...
