Fuji Electric NP1L-RS4 - Appendix 2-3-2 Write Data

App.2-6
Appendix 2-3 Loader Command Details
Appendix 2-3-2 Write data
1) Function
This command writes the specified number of words to the specified address of the specified data memory.
2) Command/mode code
Command: 01h, Mode: 00h
3) Data format of request command/response command
Data format of request command
Memory type
Memory address (L)
Memory address (M)
Memory address (H)
Number of words of write data (H)
Number of words of write data (L)
Data format of response command
Memory type
Memory address (L)
Memory address (M)
Memory address (H)
Number of words of write data (H)
Write data
.
.
.
Number of words of write data (L)
4) Arrangement of write data
The write data is arranged as shown below.
MICREX-SX module Personal computer
15
12 34 34
12
78
56
<==>
56 78
0
5) Example of Write Data command
When writing 1-word data to retain memory %MW3.0 of the CPU module (CPU station No.0), request and response
commands are as shown below. (Write data: WORD#16#1234)
Request command : FF7A00001100000000000100000108000400000001003412
Response command : 007A0000110000000000010000010800040000000100