7-2
7-1 RAS Information of General Purpose Communication Module
When you left-click here, the detailed RAS
information of the selected module appears.
Select the general purpose communication
module (SX station No.3) and then left-click
the [Detail RAS...] button.
Note: The hardware versio number is not
displayed for firmware version V.06
or later versions.
(3) The following [Detail RAS] dialog box of the general purpose communication module appears. First, the
“Module intensive status information” appears.
(4) When you select [Type information], the module format, software version number, and other information appear
in Contents, as shown below.
To Next Page
Loading...
