33
６-１-７ Synchronized range
Figure ６-8 Synchronized range
It changes into the “Synchronized range” display in pushing the SET
button. Push、▲ button/▼ button when you change the content display.
The content is changed when the SET button is pushed by the content
that changes and it moves to the next item display. Push the ESC button
when it returns to the “Synchronized range” item.
・This setting sets the synchronized range in On-Line. The INV output outputs the
frequency within this range.
・The INV output outputs by the asynchronization at a utility input outside of this
range.
・The output is cut when there are an internal abnormality and an overload at the
asynchronization.
６-１-８ AUTOSTART after shutdown with alarm
Figure ６-9 AUTOSTART after shutdown with alarm
CONF I GURAT I ON
SYNCH RANGE
SYNCH RANGE
±3Hz
SYNCH RANGE
±1Hz
SYNCH RANGE
±5Hz
Factory
Setting
〆
CONF I GURAT I ON
START AFTER ALM
START AFTER ALM
EFFECT I VE
START AFTER ALM
INVALIDITY
Factory
Setting
〆
To Next Page
Loading...