To Next PageTo Next PageHow to fix Fuji Xerox Printer that is not powered on?
If your Fuji Xerox Printer is not powering on, switch the machine power off, and then reconnect the power cord to both the power outlet and the machine. Then, switch the machine power on again. Also, ensure the machine is connected to a power outlet that supplies the proper rated voltage or current.
Why is the display blank on my Fuji Xerox ApeosPort 3570?
If the display is blank on your Fuji Xerox Printer, first press the Power button on the Control Panel to exit the Power Saver Mode. If this does not work, there may be a problem with the machine.
What to do if my Fuji Xerox ApeosPort 3570 Printer is making an odd noise?
If your Fuji Xerox Printer is making an odd noise, install the printer on a level, sturdy surface and ensure the trays are firmly pushed into the machine. If there is a foreign object inside the machine, switch the power off, and then remove it. If you cannot remove the object without dismantling the machine, further assistance is needed.
How to prevent condensation in my Fuji Xerox ApeosPort 3570?
If condensation has formed in your Fuji Xerox Printer, set the Sleep Mode trigger time to more than 60 minutes on the control panel, and let the machine stand with its power on for 60 minutes. If condensation occurs frequently, keep the machine power switched on by selecting [Device] > [System Settings] > [System Clock / Timers] > [Warmer Mode] > [On] on the Control Panel.
Why doesn't my Fuji Xerox ApeosPort 3570 switch to Power Saver Mode?
The Fuji Xerox Printer does not enter the Low Power Mode or the Sleep Mode in the following cases: when the user is operating the Control Panel, when a message indicating to replace any one of the consumables is displayed, when the machine requires user operation for paper jams or open covers, when an error occurs due to machine failure, or when the machine is executing the condensation prevention processing as the [Warmer Mode] is set to [On].
General| Brand | Fuji Xerox |
|---|---|
| Model | ApeosPort 3570 |
| Category | Printer |
| Language | English |
Details recommended consumables, handling, and replacement.
Step-by-step guide for replacing the toner cartridge.
Instructions for replacing the waste toner container.
Guides on how to replace the drum cartridge.
Addresses power, display, noise, and condensation problems.
Solves issues related to print output quality like fading, spots, and smearing.
Addresses black pages, blank output, white streaks, and toner scatter.
Resolves smeared text, garbled text, paper jams, and feed issues.
Provides instructions for clearing paper jams from various locations.
Steps for clearing jams in fusing unit, center tray, duplex unit, and lower left cover.
Guides for removing jams from standard, tandem, bypass trays, and document feeder.
Specific steps for removing documents jammed in the document feeder.
