To Next PageTo Next PageHow to fix Fuji Xerox ApeosPort 4570 that is not powered on?
If your Fuji Xerox Printer is not powering on, switch the machine power off, and then reconnect the power cord to both the power outlet and the machine. Then, switch the machine power on again. Also, ensure the machine is connected to a power outlet that supplies the proper rated voltage or current.
Why is the display blank on my Fuji Xerox ApeosPort 4570 Printer?
If the display is blank on your Fuji Xerox Printer, first press the Power button on the Control Panel to exit the Power Saver Mode. If this does not work, there may be a problem with the machine.
What to do if my Fuji Xerox ApeosPort 4570 is making an odd noise?
If your Fuji Xerox Printer is making an odd noise, install the printer on a level, sturdy surface and ensure the trays are firmly pushed into the machine. If there is a foreign object inside the machine, switch the power off, and then remove it. If you cannot remove the object without dismantling the machine, further assistance is needed.
How to prevent condensation in my Fuji Xerox Printer?
If condensation has formed in your Fuji Xerox Printer, set the Sleep Mode trigger time to more than 60 minutes on the control panel, and let the machine stand with its power on for 60 minutes. If condensation occurs frequently, keep the machine power switched on by selecting [Device] > [System Settings] > [System Clock / Timers] > [Warmer Mode] > [On] on the Control Panel.
Why doesn't my Fuji Xerox ApeosPort 4570 Printer switch to Power Saver Mode?
The Fuji Xerox Printer does not enter the Low Power Mode or the Sleep Mode in the following cases: when the user is operating the Control Panel, when a message indicating to replace any one of the consumables is displayed, when the machine requires user operation for paper jams or open covers, when an error occurs due to machine failure, or when the machine is executing the condensation prevention processing as the [Warmer Mode] is set to [On].
General| Category | Printer |
|---|---|
| Print Speed (Black & White) | 45 ppm |
| Print Speed (Color) | 45 ppm |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Memory (Standard) | 4 GB |
| Operating System Compatibility | Windows, macOS, Linux |
| Type | Multifunction |
| Functions | Printer, Scanner |
| Supported Paper Sizes | A3, A4, A5, B4, B5 |
| Max Paper Size | A3 |
| Connectivity | Ethernet |
| Network Connectivity | Ethernet |
| PDL (Page Description Language) | PCL6, PostScript 3 |
| Control Panel | 10.1-inch color touch panel |
Details the machine's components and their functions using front and rear views.
Defines guaranteed and standard printable areas, and image loss width for different paper sizes.
Information on recommended, unusable paper, and guidelines for storing and handling paper.
Instructions for loading paper into standard trays, special trays, and the bypass tray.
Procedures for loading documents into the document feeder and document glass for scanning.
Explains print surface orientation and tray capacities for outputting printed documents.
Details consumable types, handling precautions, and how to check and replace them.
Instructions for cleaning the machine's exterior, touch panel, and LED printheads.
Addresses common machine issues like power, display, noise, and condensation with causes and remedies.
Provides step-by-step guides for clearing paper jams from various sections of the machine.
Lists the machine's technical specifications including memory, resolution, speeds, and power.
Identifies the location of warning and caution labels on the machine and their meanings.
