Print Service Settings
195
Tools
5
LPD Print Queue
Set the LPD print sequence.
Note • If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may
automatically be changed. For more information on Receiving Buffer - LPD Spool, refer to
"Receiving Buffer - LPD" (P.190).
îš„Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the machine to print jobs of multiple documents continuously, the machine may
print a smaller-size job first even when a larger-size job is sent first.
îš„Job Submission Order
Prints jobs in the order of lpr print submission.
Important • This setting is valid only when [Receiving Buffer - LPD] is set to [Spool to Hard Disk]. When
any other setting, printing is performed in [Data Processing Order].
OCR Font Glyphs (0 x 5C)
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
To Next Page
Loading...
Need help?
General
