Machine Information
97
Machine Status
4
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode
and retrieve the programming.
Note • The items displayed vary depending on the options installed.
1 Select [Print Mode].
2 Select [Off-line] or [On-line].
îš„Off-line
The machine does not accept data from a computer. Any data being sent is cancelled
and not printed.
îš„On-line
The printer accepts data from a computer.
3 Select a printer language to set a print mode.
4 Set each item.
Note • The items displayed vary depending on
the printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1 Select [Retrieve Programming].
2 Select the memory number to use.
îš„Factory Defaults
You can use the factory default settings.
îš„Custom Settings
Displays the numbers stored in the memory.
To Next Page
Loading...
