Fuji Xerox ApeosPort-IV 3070 Administrator's Manual

15 Problem Solving
452
Problem Solving
15
010-310
010-313
010-314
010-315
010-317
010-318
010-319
010-320
010-325
010-326
010-327
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
010-379
010-398
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
012-210
012-211
012-212
012-213
012-221
012-223
012-224
012-225
012-226
012-227
012-228
012-229
012-230
012-231
012-232
012-233
012-234
012-243
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-246
[Cause] The Booklet Maker is not inserted completely into the Finisher.
[Remedy] Completely insert the Booklet Maker into the Finisher, and turn the
machine off and then on.
012-247
012-249
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Fuji Xerox ApeosPort-IV 3070 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV 3070
Category	Copier
Language	English