Fuji Xerox ApeosPort-IV 3070 Administrator's Manual

2 Paper and Other Media
48
Paper and Other Media
2
1 Open the Tray 5 (Bypass).
Note • If necessary, pull out the extension tray.
The extension tray can be extended in
two stages. Pull out the extension tray
gently.
2 Load paper with the side to be copied or
printed on facing down, inserting the paper
until its edge lightly touches against the
paper feed entrance.
Important • Do not load mixed paper types in tray.
• Do not load paper above the maximum fill
line. It might cause paper jams or
machine malfunctions.
• When making copies or printing on thick-
stock paper such as postcards, and the
paper is not fed into the machine, apply a
curl to the leading edge of the paper as
shown in the figure on the right. Note,
however, that excessively bending or
folding the paper may cause paper jams.
• Depending on the type of the
heavyweight paper, paper may not be fed
to the machine or image quality may
deteriorate.
3 Adjust the paper guides to align the edges of
the paper loaded.
4 Instruct a copy or print job.

Fuji Xerox ApeosPort-IV 3070 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV 3070
Category	Copier
Language	English